Wheel installation manual 

 Before installing this product, please carefully read the manual, the wheels were installed will not be returned. To ensure safety and maintain product performance, please follow these instructions to install and use: 
 Before you install the tire, first check the wheels and the car match, look at the specifications of the bolt holes are the same, Do not force the wheels fitted, should make it the natural place. Bolt holes should be kept clean, not oil. 
 Check the wheels and brake system, suspension system or chassis to other parts of the interference. If interference, indicating that the wheel is not suitable for assembly on the front and rear wheels should be checked. 
 Install wheels, tires and wheels should be checked whether the match. 
 Specialized tires installed on the device, install the wheel. Not pay attention to operating the wheel is damaged, the manufacturer is irresponsible. 
 Install the tire, the tire inflation pressure must not exceed 40psi (0.028Mpa). If in the above under the pressure of the tire is still not in place, you should check whether a foreign body, Tire lubricants properly as well as tire and wheel match. Install the tire, it should be a balance test, and control the imbalance in the specified range. 
 According to the size of the wheel valve hole diameter, selection and matching valve, otherwise it will cause traffic hazards. 
 Install the wheel before the first nut on the wheel bolts, check nuts and bolts of size, size, length is appropriate. Locking length of the nut should not be less than the diameter of the bolt. (Such as the M12 bolts, the nut locking the length of not less than 12mm) 
 The shape of the bolt hole on the aluminum alloy wheels have a 60-degree oblique, spherical and straight three, be sure to use the correct shape of the bolt or nut in order to avoid the bolts loose, dangerous. 
 Tighten the nut, the first hand pretension good, and then use copper wrench to tighten the diagonal method. Do not use impact wrenches to avoid the pinch of tight or too loose. Tighten the wheel nut or bolt torque should meet the requirements of manufacturers. 
 Before driving to the left and right direction to the front wheel rotation (go to the maximum position), check the wheel again whether the brake system, suspension system or chassis of the other departments of interference. 
 The newly installed wheels, the initial 100 km, it should tighten the first nut to ensure that the bolt torque. Recommended after each driving 1000 kilometers fastening nut, in order to maintain the proper torque. 
 Absolutely not allow the washer between the wheel mounting surface and the wheel (film) to adjust the wheel Partial Moment, or peril. 
 Install cassette decorative cover, to use non-metallic objects and typing it. 
 To keep the wheels clean. Sediment, dirt, chemicals can make the wheel discoloration or damage to the finish. Do not heat in the wheel cleaning wheels. 
 Prohibit the use of strong acid and alkali cleaning, use neutral detergent and water. When cleaning use a soft cloth or sponge, fine hard brush or metal brush. 
 Receiving Notice: receipt must inspect the goods for damage and then sign for the goods, first check the wheels to match with the car, look at the specifications of the bolt holes are the same, Do not force the wheels fitted, should make it the natural place. Bolt holes should be kept clean, not oil. Check good before install tires 
 The company is located in Nanhai, Foshan City, Guangdong Province, China Huangqi Town, Village Pump north on the 5th, the supply of auto parts, each brand alloy wheels, tires, wheel nuts, screws, gas nozzle, aluminum center ring, brake pads, brake discs , oil, spark plugs, wiper blades, fuel pump, lock, alarm system, navigation, parking radar, rubber flooring, car wash wax, car perfume seat, Philips light bulbs. dvd navigation, xenon lamp, Welcome! 
 Contact: QQ: 943 321 606 Tel: 13534424979 E-mail: yinyun287706787@163.com 
 Contact: Chen Jian Zhou